If an authorization is required, getting it is generally a simple matter of decreasing to the city office with your plans for the job, having the plans examined and paying the license fee. Prior to you get to work, you'll want to make certain you have an easy method to get rid of your old shingles and roof particles.
There are a number of disposal solutions offered, but leasing a dumpster for shingles is the most practical. You'll be able to rent the container for the whole length of your project, and you and your contractor will not need to make multiple journeys to the landfill, which saves money and time.
Now it's time to collect the tools you'll require to complete your roofing system work. Most of these must be available in your local home enhancement store, but you can also order devices online if needed. Sturdy ladders Hammer (one per individual) Hammer tacker (a minimum of two) Roofing nails Staples Plywood sheets (enough to lean against roofing system jacks, plus several additional) Crowbar (at least two) Adjustable roofing jacks (a number of) Chalk line Tarps (a number of) Garden fork and/or roof shovel (one per person) Press brooms (a minimum of two) # 30 Roof felt Ice and water barrier Use thick-soled shoes or boots with excellent grip to keep from slipping while moving on the roofing system.
Due to the fact that getting rid of shingles will trigger them to shed granules, you must also use safety glasses to safeguard your eyes. And naturally, a safety harness is extremely recommended when working in such a precarious environment. You wish to make sure that any shingles or nails that miss the dumpster, or other disposal approach you're using, don't trigger damage to your property.
Lay tarps over shrubs or other landscaping components around the perimeter of your house. Establish your ladders in the location where they are the most steady and the least likely to be bumped by anyone death by. Finally, established roofing system jacks, which are steel anchors that attach to your roof and hold slabs to walk on for security.
Use a minimum of 3 nails per jack. When the jacks are secured, include in plywood boards. This forms a barrier to keep gotten rid of shingles from sliding off the roofing, in addition to being a safety measure. Another vital part of roofing system preparation is considering the other ways the shingle removal will impact your life in the house.
Some of the items to be gotten ready for include: various levels of noise throughout the period of the project, securing breakable items from the vibration of building and construction, putting porch/patio furnishings and your gas grill far from your house or in the garage, moving your automobile away from the driveway, and securing any valuables kept in the attic with a tarpaulin in case particle particles can be found in through wood slots. asphalt roof shingles.
Work your shovel or fork under the ridge caps the shingles at the peak of your roofing system and pry them loose. Allow them to move down to the jacks. Once you have actually pried up the caps, you'll be working your way down the roofing system, eliminating shingles in 2 to 3-foot areas.
For the minute, don't fret if some nails get left in the roof. You'll deal with those later on. When you've worked your way down to the jacks, collect the discarded shingles and toss them in the dumpster. Note: shingles are heavy. Specifically if you needed to eliminate numerous layers, even a little area's worth of shingles will be really heavy - replacing shingles.
Take small armfuls in as lots of journeys as needed. You don't wish to risk stumbling and slipping as you move across the roofing system. Now return to the peak and begin removing your next 2 to 3-foot section of shingles. Check the flashing the thin pieces of product that direct water away from the home for indications of wear.
If any of the flashing shows signs of wear, remove and discard it. If you are keeping your flashing, remove the nails and bend it up and back with a lever to remove the shingles underneath (roof replacement). Keep in mind: The flashing in valleys and around chimneys and plumbing vents generally has the exact same lifespan as your shingles, so you'll want to eliminate it.
You'll go back to this step after you've eliminated all shingles. You've eliminated all the shingles down to the jacks on the part of the roof you're currently working. Now it's time to remove the jacks and remove the last remaining shingles under them. You can set about this in one of two ways.